--- title: "Add a syslog server profile" slug: "add-a-syslog-server-profile" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:36Z published: 2026-10-05T15:40:36Z canonical: "docs.trellix.com/add-a-syslog-server-profile" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Add a syslog server profile You can add server profiles that will be populated in the **Target Server** drop-down list on the **Add a Syslog Notification Profile** page. ## Task 1. Click **Add** beside the **Target Server** drop-down list. The **Add a Syslog Server Profile** page is displayed. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-8490E71F-02B1-4325-9CCD-3A07C57F8830-low.png?sv=2026-02-06&spr=https&st=2026-11-22T15%3A28%3A24Z&se=2026-11-22T16%3A28%3A24Z&sr=c&sp=r&sig=1L6dsRo2Sk6%2F6bj3D3mmQ2JDPMG5GYUXjiwBRz9M%2Bzw%3D) 2. Enter the **Target Server Profile Name**. 3. Enter the syslog server name or IP address. > [!NOTE] > Note > > The length of server name has been increased to support up to 255 characters from 40 characters. 4. Select *TCP* or *UDP* from the **Protocol** drop-down list. > [!NOTE] > Note > > If you select the TCP protocol: > > - You will have to provide a certificate when you select the > **Use SSL** checkbox. > - Click > **Test Connection** to check if the connection is successful. If a TCP server is down, at least five attempts will be made to ping the server before a fault is raised. 5. Specify the port. By default, the port is set to 514. 6. Click **Save**. Now you can select the server where you want to forward the alert.