--- title: "Add endpoints to quarantine" slug: "add-endpoints-to-quarantine-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:17Z published: 2026-11-19T12:29:17Z canonical: "docs.trellix.com/add-endpoints-to-quarantine-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Add endpoints to quarantine You can quarantine endpoints to block all the traffic originating from the specified IP address seen on the selected device for the selected time. While adding an endpoint to quarantine, you can also re-direct the quarantined endpoint to the configured remediation portal. 1. Click the **Analysis** tab and select the domain from the **Domain** drop-down list. 2. Select **Quarantine**. The **Quarantine** page is displayed. 3. Click **Add**. The **Add to Quarantine** pop-up is displayed. **Add to Quarantine**![Add to Quarantine](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-36385bc3-aac1-80e3-b697-d2366c53f178(7).png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A37%3A10Z&se=2026-11-20T14%3A37%3A10Z&sr=c&sp=r&sig=pU2cXuy1apnbD5dBT7foJUSqdRtP37RP%2BG3YsrPHda8%3D) 4. Update the following fields: | Option | Definition | | --- | --- | | **IP Address** | Enter the IP address of the endpoint. | | **Device** | Select the specific device of the endpoint whose traffic originating from the IP address you want to block. | | **Quarantine Duration** | Select the quarantine duration from the drop-down list. | | **Remediate** | Select the checkbox to redirect the configured endpoint to the configured remediation portal. > [!NOTE] > Note > > You can configure the remediation portal settings in **Devices** → **Global** → **IPS Device Settings** → **Quarantine** → **Remediation Portal**. > > Remediation cannot be configured for IPv6 address. The checkbox and the information icon for remediation is not displayed if you enter an IPv6 address in the **IP Address** field. | 5. Click **Quarantine**. The endpoint is added and displayed in the **Quarantine** page.