--- title: "Add SNMPv3 users at admin domain level" slug: "add-snmpv3-users-at-admin-domain-level" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:13Z published: 2026-10-05T15:40:13Z canonical: "docs.trellix.com/add-snmpv3-users-at-admin-domain-level" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Add SNMPv3 users at admin domain level SNMPv3 users can be added at the domain level or at an individual device level. Any number of users can be added at the domain level unlike to a device SNMPv3 configuration where it is limited to 10 users. To add a SNMPv3 user at the domain level, do the following: ## Task 1. Select **Devices** → **** → **Global** → **Common Device Settings** → **Remote Access** → **NMS** → **NMS Users**. 2. Click ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-A6ACF06E-8B7C-4F33-9335-99E4B1FDEB3D-low(2).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A16%3A30Z&se=2026-11-20T11%3A16%3A30Z&sr=c&sp=r&sig=FohB%2BItoSKpwfmetFsvp6zYPnVMggHYFMUhJzP9p%2FKs%3D). The **Add NMS User Account** dialog is displayed. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-7A21AF02-1E2F-4760-AFCC-20D33BAFBD5B-low.jpg?sv=2026-02-06&spr=https&st=2026-11-20T10%3A16%3A30Z&se=2026-11-20T11%3A16%3A30Z&sr=c&sp=r&sig=FohB%2BItoSKpwfmetFsvp6zYPnVMggHYFMUhJzP9p%2FKs%3D) 3. Enter the **User Name**. > [!NOTE] > Note > > The length of the user name should be between 8 to 31 characters. It can consist of alphabets and numerals. Special characters and spaces are not allowed. 4. Enter the **Authentication Key** (re-enter at **Confirm Authentication Key**). 5. Enter the **Private Key** (re-enter at **Confirm Private Key**). > [!NOTE] > Note > > The length of the Authentication and Private key should be between 8 to 15 characters. Special characters are not allowed. > [!NOTE] > Note > > Since the communication is over SNMP version 3, the supported authentication protocol is "SHA1" and encryption algorithm is "AES128". 6. Click **Save** or **Cancel** to end the authentication. > [!NOTE] > Note > > The **User Name**, **Authentication Key** and **Private Key** entered in the Manager should be the same as entered in the SNMP MIB browser.