--- title: "Add the Virtual Sensor in the Manager" slug: "add-the-virtual-sensor-in-the-manager" tags: ["Product Usage", "vIPS 10.1.10"] updated: 2026-09-11T20:35:28Z published: 2026-09-11T20:35:28Z canonical: "docs.trellix.com/add-the-virtual-sensor-in-the-manager" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Add the Virtual Sensor in the Manager You can add the Virtual Sensor in the Manager and specify a shared secret key. You can use a Manager installed on a VM or on a physical server. ## Task 1. In the Manager, go to **Devices** → **** → **Global** → **Device Manager.** The **Device Manager** page is displayed. 2. Select the **Sensors** tab and click ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-8D2203E5-2C86-4970-8BBE-0E051DDA1A11-low(1).jpg?sv=2026-02-06&spr=https&st=2026-11-20T07%3A13%3A56Z&se=2026-11-20T08%3A13%3A56Z&sr=c&sp=r&sig=urXho%2ByzL0P9oiCnZ2R3dkYwYXA1pFiiq66f282TWeQ%3D). The **Add Device - Step 1 of 2** panel is displayed. 3. Enter relevant details in the **Add Device - Step 1 of 2** panel. 1. Enter the **Name** of the device. The Virtual Sensor name must begin with a letter. The maximum length of the name is 25 characters. 2. Enter the **Shared Secret**. The shared secret key must be a minimum of 8 characters and maximum of 25 characters in length. The key cannot start with an exclamation mark nor can have any spaces. The parameters that you can use to define the key are as follows: - 26 alphabets: Upper and lowercase (a,b,c,...z and A, B, C,...Z) - 10 digits: 0 1 2 3 4 5 6 7 8 9 - 32 symbols: ~ ` ! @ # $ % ^ & * ( ) _ + - = [ ] { } \ | ; : " ' , . [!NOTE] > Note > > You must use the same **Device Name** and **Shared Secret** when you deploy the Virtual Sensor. 3. Enter the **Confirm Shared Secret**. 4. Select the **Device Type** as **IPS Sensor**. 5. Select the **Deployment Mode** as either **Direct** or **Indirect** from the drop-down. In **Direct** mode, pending changes are delivered directly from the Manager to Sensor. It is the recommended mode. In **Indirect** mode, when trust is established between the Manager and the Sensor, the initial configuration update from Manager to Sensor will be stopped. 4. You can enter the **Contact Information**, **Location**, and additional details in **Comment**, if required. 5. Click **Save.** Add Device - Step 1 of 2 panel ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-5531C1F5-6B7E-439F-8C97-8A9002005B5D-low.jpg?sv=2026-02-06&spr=https&st=2026-11-20T07%3A13%3A56Z&se=2026-11-20T08%3A13%3A56Z&sr=c&sp=r&sig=urXho%2ByzL0P9oiCnZ2R3dkYwYXA1pFiiq66f282TWeQ%3D) For more information on deleting a configured Sensor, see the sections Delete a Sensor from the Manager and How to replace a Sensor in Trellix Intrusion Prevention System Product Guide. An **Information** dialog box is displayed to confirm the addition of Sensor. Click **OK**. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-4B34FD36-133F-46E4-AAC1-F6AAB0784CFF-low(1).jpg?sv=2026-02-06&spr=https&st=2026-11-20T07%3A13%3A56Z&se=2026-11-20T08%3A13%3A56Z&sr=c&sp=r&sig=urXho%2ByzL0P9oiCnZ2R3dkYwYXA1pFiiq66f282TWeQ%3D) The new Virtual Sensor is displayed on the **Sensors** tab of **Device Manager** page.