--- title: "Adding a destination to the data exfiltration whitelist using the Web UI" slug: "adding-a-destination-to-the-data-exfiltration-whitelist-using-the-web-ui" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-02T17:27:05Z published: 2026-09-02T17:27:05Z canonical: "docs.trellix.com/adding-a-destination-to-the-data-exfiltration-whitelist-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Adding a destination to the data exfiltration whitelist using the Web UI Use the Add Whitelist Network dialog box to add a destination IPv4 address range to the data exfiltration alerts whitelist. ![Settings_DataExfiltration_Whitelist_add.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-20884998-d59c-bd75-fc65-d0bb46475eea.png?sv=2026-02-06&spr=https&st=2026-11-20T04%3A59%3A41Z&se=2026-11-20T05%3A59%3A41Z&sr=c&sp=r&sig=rnSOXS1Ahs6CG8g3lVmUc1aHwmH8oL7rBbjwUnRaQTs%3D) This whitelist specifies IPv4 *destination addresses* only. The appliance does not generate data exfiltration alerts for data uploads to hosts or networks in the data exfiltration whitelist. The whitelist is empty by default. ### Prerequisites - Admin access to the SmartVision appliance. To add a destination to the data exfiltration detection whitelist: 1. Log in to the appliance Web UI and select **Settings > SmartVision Configuration**. 2. Click the **Data Exfiltration Detection** tab. 3. Go to the Whitelist Networks panel and click **Add**. 4. Enter the IPv4 address range you want to whitelist. The appliance does not generate data exfiltration alerts for data uploads to hosts or networks in the data exfiltration whitelist. Specify the address in classless inter-domain routing (CIDR) format: (`<ipAddress>/<prefix>)`. 5. Click **Add**. The new address appears in the Whitelist Networks pane. :