--- title: "Adding a local CRL file using the configuration menu" slug: "adding-a-local-crl-file-using-the-configuration-menu-2" tags: ["Install and Get Started", "NDR 4.x", "Customer", "Network Security"] updated: 2026-11-17T09:22:39Z published: 2026-11-17T09:22:39Z canonical: "docs.trellix.com/adding-a-local-crl-file-using-the-configuration-menu-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Adding a local CRL file using the configuration menu Use the menu options in this section to add a local Certificate Revocation List (CRL) file to the NDR appliance. Only one CRL file can be present on the system. To add a local CRL file: 1. Log in to the NDR as npadmin using the NDR IP address or FQDN. For example: `$ ssh npadmin@10.1.0.1` or `$ ssh npadmin@exampleFQDN` 2. Enter privileged mode: `npadmin@ia> enable` 3. Enter the npadmin password. The password can be 5 to 24 characters long. `[sudo] password for npadmin: <password>` 4. Enter configuration mode: `npadmin@ia# configure system` 5. Enter configuration CAC menu. `npadmin@ia(config)# authentication` 6. In the CAC/PIV configuration menu, select `1` to access the Authentication Mechanism menu `Authentication Mechanisms:` `1: PAM` `2: LDAP` `3: Radius` `4: TACACS+` `5: Active Directory` `6: PKI` `7: PKI w/ LDAP` `8: PKI w/ Active Directory` `C: Cancel changes and exit` 7. Depending on the external user management system you use, select a PKI option: 1. Enter `6` if you will not configure LDAP or Active Directory with PKI for authorization. 2. Enter `7` to configure PKI with LDAP for authorization. 3. Enter `8` to configure PKI with AD for authorization. 8. Select `Q` to save your changes and exit to the configure system menu. 9. Enter the CAC/PIV configuration menu. `npadmin@ia(config)# authentication` 10. Select `6` to configure PKI. 11. Select `2` to configure PKI authentication. 12. Select `1` to configure the PKI status. 13. Enable PKI. `Status (disabled, optional, required): optional` 14. In the PKI Configuration menu, select `3` to enter the CRL Configuration menu. The following appears: `CRL Configuration:` `1: CRL Retrieval URL = <none>` `2: CRL Retrieval interval (hours between refresh) = 1` `3: Upload CRL file = <none>` `4: View CRL contents` `5: Delete CRL file` ------------------------------------------------------------ `Q: Save changes and exit` `C: Cancel changes and exit` `Enter your choice:` 15. Select `3` to upload a CRL file to the appliance. Upload the CRL file to /home/npscp/transfer/. 16. Select `2` to verify the content of the CRL file. `-----BEGIN X509 CRL----- MIIC3jCBxwIBATANBgkqhkiG9w0BAQsFADA0MTIwMAYDVQQDEylGaXJlRXllIEVu dGVycHJpc2UgRm9yZW5zaWNzIFRlc3QgUm9vdCBDQRcNMTkwMjE5MjIxMDM2WhcN MzkwMjIwMTAzMDM2WqBfMF0wHwYDVR0jBBgwFoAUKxsMtzoR3wEUm7DBjnOOW8y9 wpYwEAYJKwYBBAGCNxUBBAMCAQAwCgYDVR0UBAMCAQIwHAYJKwYBBAGCNxUEBA8X DTM5MDIxOTIyMjAzNlowDQYJKoZIhvcNAQELBQADggIBAJ02SEL8g9K5Ygx0UH7o uRR41SOQ6XIFJIImfQyJS/x1Es+dY5MCPqvV9s3yQpPoRW+CklEWbmYYdUT5qh3j CahyhIGQDVb/89pThW+QO/qW52yzu6g0yL+PjLfa1PSTLyNJWtLhKjwzzMqwzWZp ----- END X509 CRL-----` 17. Select `Q` repeatedly until you save your changes and exit the menu.