--- title: "Adding a node to a cluster" slug: "adding-a-node-to-a-cluster" updated: 2026-08-24T20:40:19Z published: 2026-08-24T20:40:19Z canonical: "docs.trellix.com/adding-a-node-to-a-cluster" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Adding a node to a cluster A Virtual Execution appliance serves no purpose until it is added to a cluster. After you add a Virtual Execution appliance to the Central Management appliance, it is an available node that can be added to an IVX cluster. You can determine whether a Virtual Execution appliance is an available node from the Central Management Web UI or CLI and the Virtual Execution CLI. The **Cluster** column in the Central Management Web UI indicates whether a node is available. The Node information section in the following CLI command output is empty because the vx-2 node is not currently part of a cluster, so it is available. ``` vx-2 # show mvx node status full MVX Cluster: Node Status ... Node information: vx-2 # ``` **Prerequisites** - Operator or Admin access to the Central Management appliance ##### Adding a node to a cluster using the Web UI Use the **Appliances** > **Clusters** page to add a node to an IVX cluster. ###### To add a node to a cluster: 1. Log in to the Central Management Web UI. 2. Select **Appliances** > **Clusters**. 3. Click the **Actions** menu, and then select **Edit**. 4. Click the arrow to move the node from the **Available** list to the **Selected** list. 5. Click **Next**. 6. Enable at least one node as a broker and define one node as the master configuration. 7. Click **Update**. ##### Adding a node to a cluster using the CLI Use the commands in this section to add a node to an IVX cluster. ###### To add a node to a cluster: 1. Log in to the Central Management CLI. 2. Enable the CLI configuration mode: ``` cm-hostname > enable cm-hostname # configure terminal ``` 3. Add the node: ``` cm-hostname (config) # cmc mvx cluster node ``` 4. Verify that the node was added: ``` cm-hostname (config) # show cmc mvx cluster Cluster-Acme nodes NODES: Cluster-Acme     CONNECTED     HEALTHY ADDRESS -------------           ---------     ------- ------- vx-1                    yes           yes     10.11.121.12 vx-2                    yes           yes     10.11.121.18 ... ```