--- title: "Adding a user in the CLI" slug: "adding-a-user-in-the-cli-2" tags: ["Install and Get Started", "NDR 4.x", "Customer", "Network Security"] updated: 2026-11-17T09:22:39Z published: 2026-11-17T09:22:39Z canonical: "docs.trellix.com/adding-a-user-in-the-cli-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Adding a user in the CLI 1. Log in to the CLI on the NDR. 2. Enter privileged mode: `hostname > enable` 3. Enter the admin password: `[sudo] password for <npadmin>: <password>` 4. Enter configuration mode: `hostname # configure system` 5. Enter the user menu: `npadmin@hostname(config)# users` 6. Enter `1` to add a user. 1. Enter the user name. 2. Enter the full name. 3. Set the permissions level for the user. See [Roles](/network-and-platform/docs/roles-2) for more information. 4. Confirm whether the values displayed are correct: type `y` to confirm and move to the next setting; type `n` to return to the users menu. 5. Set the new user as remote or non-remote: type y to specify remote; type n to specify non-remote. A remote or dummy user is a prerequisite for RADIUS/TACACS+ authentication. > [!NOTE] > Note > > When a remote user logs in with the same username as a local user: > > - If the local user is currently logged in, the remote user is assigned the same role. 6. Set the password for a non-remote user. 7. Type `y` to confirm the user settings.