--- title: "Adding an alert policy exception using the Web UI" slug: "adding-an-alert-policy-exception-using-the-web-ui" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:40Z published: 2026-09-12T20:42:40Z canonical: "docs.trellix.com/adding-an-alert-policy-exception-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Adding an alert policy exception using the Web UI Follow these steps to configure an alert policy exception using the Web UI. ![NX_APE_add_attackCategory.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-19a24453-2dd5-f204-d8d7-0f5562bbb828.png?sv=2026-02-06&spr=https&st=2026-11-20T02%3A04%3A47Z&se=2026-11-20T03%3A04%3A47Z&sr=c&sp=r&sig=FLYedTuZrVBupKS2K85m3FJACvwUDZJKEbk5BZX2eFM%3D) > [!NOTE] > Note > > This topic describes how to add an alert policy exception from the **Settings > Alert Policy Exceptions** page. > > - To add an alert policy exception for a specific alert, see [Viewing alerts and events using the Web UI](/network-and-platform/docs/viewing-alerts-and-events-using-the-web-ui). > - To add an alert policy exception for a specific IPS event, see "Details for an IPS Event Grouping" in the Network Security IPS Feature Guide. ### *Prerequisites* - Admin or Operator access to the appliance. **To add an alert policy exception:** 1. Choose **Settings > Alert Policy Exceptions**. 2. Click **Add Policy Exception**. 3. Specify the policy exception type: **Using Signature ID** To configure a policy exception for a single alert rule, select this option and enter the eight-digit ID of the alert rule In the Signature ID field. **Using Signature Name** To configure a policy exception for a vulnerability that encompasses multiple alert rules, select this option and enter the name of the vulnerability in the Signature Name field. > [!NOTE] > Note > > To configure a policy exception that matches all signatures, select **Using Signature Name** and enter **ALL** in the Signature Name field. **Using Attack Category** To configure a policy exception for an attack category that encompasses multiple alert rules or vulnerabilities, select this option and use the **Attack Category** menu to choose the attack category. 4. (Optional) Specify a source, destination, or both: - To specify a source machine or subnet, use the Source IP/Mask field. Leave the field empty to match any source address. - To specify a destination machine or subnet, use the Destination IP/Mask field. Leave the field empty to match any destination address. 5. (Optional) Use the Interface drop-down to specify the interface: all monitoring port pairs, a single monitoring port pair, or the management interface. 6. Use the Action drop-down to specify the override action. For more information, see [Alert policy exception actions](/network-and-platform/docs/alert-policy-exception-actions). 7. (Optional) Add a note that describes the policy exception. 8. Click **Add**.