--- title: "Adding an Amazon S3 storage in the Web UI" slug: "adding-an-amazon-s3-storage-in-the-web-ui-1" tags: ["File Protect (FX)", "Product Usage"] updated: 2026-09-08T21:44:57Z published: 2026-09-08T21:44:57Z canonical: "docs.trellix.com/adding-an-amazon-s3-storage-in-the-web-ui-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Adding an Amazon S3 storage in the Web UI **To create an Amazon S3 storage using the Web UI:** 1. Log in to the File Protect appliance Web UI. 2. Click the **Storage** tab. All configured shares are displayed in the **Currently Configured Storages** section. 3. Click **Add Storage**. 4. Select AWS for **Storage Type**. 5. Click **Download CloudFormation Template** to download a template JSON file if the storage administrator is yet to set the Cloud Formation configuration. ### Note The Cloud Formation Template contains the format in which the configuration and authentication details are specified. You can download this file to share it with the storage administrator if it is not yet run. The administrator runs this file with authentication keys in the platform to set it. To enter these credentials in the appliance, refer [Authenticating the connection to an Amazon S3 storage](/docs/authenticating-the-connection-to-an-amazon-s3-storage-1) 6. Enter the **Storage Name** of the Amazon S3 storage. 7. Select **S3** for App. 8. Enter the **Bucket Name**. This signifies the bucket to scan. 9. Enter the **Queue Name**. This signifies the SQS queue. 10. Enter the **Region** of the Amazon storage bucket. 11. Select the **Type of Share**. 12. Click **Configure Storage**. The storage is displayed in the **Currently Configured Storages** section. The icon in the Status column is yellow while the storage is being added, and turns green after it is added successfully. :