--- title: "Adding an appliance in a NAT deployment (using the Central Management System appliance)" slug: "adding-an-appliance-in-a-nat-deployment-using-central-management-system-2" updated: 2026-08-25T20:28:02Z published: 2026-08-25T21:18:40Z canonical: "docs.trellix.com/adding-an-appliance-in-a-nat-deployment-using-central-management-system-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Adding an appliance in a NAT deployment (using the Central Management System appliance) A Central Management System administrator can add an appliance that is behind a NAT gateway to the Central Management System appliance. ### Note This procedure must be performed using the Central Management System CLI, not the Web UI. Prerequisites - Operator or Admin access - Network address translation (NAT) mapping as described in [About NAT address mapping](/docs/about-nat-address-mapping-3) . - The virtual NAT IP address and port that map to the appliance internal IP address and SSH port - Unique hostname for each appliance being added :