--- title: "Adding an SNMP trap sink using the CLI" slug: "adding-an-snmp-trap-sink-using-the-cli-2" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Customer", "Network Security"] updated: 2026-09-07T21:14:23Z published: 2026-09-07T21:14:23Z canonical: "docs.trellix.com/adding-an-snmp-trap-sink-using-the-cli-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Adding an SNMP trap sink using the CLI You can use the CLI to to send notifications to one or more SNMP trap sink servers. ### Prerequisites - Admin or Operator access to the Malware Analysis appliance. **To add an SNMP Trap Sink:** 1. Enable the CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Enable SNMP notifications: ``` hostname (config) # fenotify snmp enable ``` 3. Specify the name of the SNMP server (for example, NX7400) for SNMP notifications: ``` hostname (config) # fenotify snmp trap-sink ``` 4. Specify which servers will receive SNMP notifications (one server per command): ``` hostname (config) # fenotify snmp trap-sink enable ``` 5. Specify the IP address or DNS address of the SNMP server to receive the notifications: ``` hostname (config) # fenotify snmp trap-sink address ``` 6. Save the configuration: ``` hostname (config) # write memory ```