--- title: "Adding an SNMP trap sink using the Web UI" slug: "adding-an-snmp-trap-sink-using-the-web-ui-2" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Customer", "Network Security"] updated: 2026-09-07T21:14:23Z published: 2026-09-07T21:14:23Z canonical: "docs.trellix.com/adding-an-snmp-trap-sink-using-the-web-ui-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Adding an SNMP trap sink using the Web UI Use the Notification Settings page to send notifications to one or more SNMP trap sink servers. > [!NOTE] > Note > > SNMP notifications are not management information notifications. For more information about management information notifications, refer to the “Network Administration” section of the *Malware Analysis System Administration Guide*. ### Prerequisites - Admin or Operator access to the Malware Analysis appliance. **To add an SNMP trap sink:** 1. In the Web UI, open **Settings > Notifications**. 2. Select **SNMP** from the Notifications Settings tab. 3. Click **Add SNMP Trap Sink**. 4. Enter the following Trap Sink information: - Trap sink name - IP address of the SNMP trap sink server - Community script 5. Select **Enabled**. 6. Select the following Alert options: - Delivery method - Notification frequency - SNMP version 7. Click **Add new SNMP trap sink**.