--- title: "Adding appliances to groups using the CLI" slug: "adding-appliances-to-groups-using-the-cli-2" updated: 2026-08-25T21:17:55Z published: 2026-08-25T21:17:55Z canonical: "docs.trellix.com/adding-appliances-to-groups-using-the-cli-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Adding appliances to groups using the CLI Use the commands in this section to add appliances to groups. To add an appliance to a group: 1. Enable the CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Add an appliance to a group: ``` hostname (config) # cmc group appliance ``` 3. Verify that the appliance was added: ``` hostname (config) # show cmc group ``` 4. Save your change: ``` hostname (config) # write memory ``` ### Example This example add the FX-06 appliance to the Acme group. ``` hostname (config) # cmc group Acme appliance FX-06 hostname (config) # show cmc groups Acme Group Acme   Comment:            Acme division appliances   Appliances;       FX-06 ``` :