--- title: "Adding hosts to the home network using the Web UI" slug: "adding-hosts-to-the-home-network-using-the-web-ui" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-02T17:27:09Z published: 2026-09-02T17:27:09Z canonical: "docs.trellix.com/adding-hosts-to-the-home-network-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Adding hosts to the home network using the Web UI Use the Add Home Network dialog box to add a range of IPv4 addresses to the data exfiltration detection home network list. ![Settings_DataExfiltration_Homenet_add.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-33787495-48f2-bc72-1759-fb9e0e315737.png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A36%3A11Z&se=2026-11-20T07%3A36%3A11Z&sr=c&sp=r&sig=mMB%2Fe8pJaeXNO1uNeemmkui9NSWUeoE4qdRthsc%2F3%2FY%3D) When data exfiltration detection is enabled, the appliance monitors the egress traffic from the hosts specified in the home network list. The list is empty by default. ### Important After you configure or edit the homenet list, it takes 72 hours to build baseline egress traffic profiles for the specified hosts and networks. ### Prerequisites - Admin access to the SmartVision appliance. To add an IP address range to the data exfiltration detection homenet list: 1. Log in to the appliance Web UI and select **Settings > SmartVision Configuration**. 2. Click the **Data Exfiltration Detection** tab. 3. Go to the Home Networks panel and click **Add**. 4. Enter the address range in classless inter-domain routing (CIDR) format (`<ipAddress>/<prefix>`). In the example, hosts with IP addresses from 10.13.65.0 through 10.13.65.255 are added to the list of hosts monitored for data exfiltration activity. 5. Click **Add**. :