--- title: "Adding or deleting SSL decryption mirroring using the CLI" slug: "adding-or-deleting-ssl-decryption-mirroring-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:40Z published: 2026-09-12T20:42:40Z canonical: "docs.trellix.com/adding-or-deleting-ssl-decryption-mirroring-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Adding or deleting SSL decryption mirroring using the CLI Use the commands in this section to add mirroring of SSL decrypted traffic or to delete mirroring of SSL decrypted traffic from the monitoring interface pair on the Network Security appliance. **To add mirroring of SSL decrypted traffic on an interface:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enable mirroring of SSL decrypted traffic on the monitoring interface pair. ``` hostname (config) # policymgr interface ssl-intercept mirror enable ``` where `<interfacePair>` is the interface pair that is already configured in inline mode (monitor or block mode) for SSL decryption mirroring and the mirror port is in tap mode. 3. (Optional) Specify a new destination TCP port number to modify the SSL decrypted packet before it is mirrored. ``` hostname (config) # policymgr interface ssl-intercept mirror tcp-port ``` where `<portNumber>` is the destination TCP port number. 4. (Optional) Specify the VLAN identification number so that the tag is inserted into the decrypted mirrored packet. ``` hostname (config) # policymgr interface ssl-intercept mirror vlan ``` where `<vlanID>` is the VLAN identification number. The range is from 1 to 4094. 5. Save your changes. ``` hostname (config) # write memory ``` 6. Verify the status of mirroring SSL decrypted traffic. ``` hostname (config) # show policymgr interfaces Policy enabled: yes Interface A  Active      : yes  op mode     : block (enforcing)  fail-safe   : close  policy      : mixed  tolerance   : 1  Ports       : pether3  pether4  QinQ        : no  QinQ-evet   : 0x88a8  Mirror:    Non-SSL   : no   SSL       : yes TCP Port : 456  vlan : 545   Port      : pether9 ........ ``` The "Mirror SSL" line displays "yes" if mirroring is added for SSL decrypted traffic. **To delete mirroring of SSL decrypted traffic from an interface:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Delete mirroring of SSL decrypted traffic from an interface pair. ``` hostname (config) # no policymgr interface sslintercept mirror enable ``` where `<interfacePair>` is the monitoring interface pair. 3. If a new destination TCP port number has already been specified, delete the destination TCP port number from an interface pair. ``` hostname (config) no policymgr interface sslintercept mirror tcp-port ``` where `<portNumber>` is the destination TCP port number. 4. If the VLAN identification number has already been specified, delete the VLAN ID from an interface pair. ``` hostname (config) # no policymgr interface sslintercept mirror vlan ``` 5. Delete the mirror port from an interface. ``` hostname (config) # policymgr interface mirror clear ``` where `<interfacePair>` is the monitoring interface pair that is forwarding traffic. 6. Save your changes. ``` hostname (config) # write memory ``` 7. Verify the status of mirroring SSL decrypted traffic. ``` hostname (config) # show policymgr interfaces ``` ``` Policy enabled: yes Interface A Active :    yes op mode :   block (enforcing) fail-safe : close policy :    mixed tolerance : 1 Ports :     pether3 pether4 QinQ :      no QinQ-evet : 0x88a8 Mirror: Non-SSL : no SSL : no Port : ........ ``` The "Mirror SSL" line displays "no" if mirroring is deleted for SSL decrypted traffic.