--- title: "Adding Ports to a Whitelist Using the Web UI" slug: "adding-ports-to-a-whitelist-using-the-web-ui" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:33Z published: 2026-09-12T20:42:33Z canonical: "docs.trellix.com/adding-ports-to-a-whitelist-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Adding Ports to a Whitelist Using the Web UI Use the **Whitelist Settings** page to add a port to a whitelist using the Web UI. You enter each port separately. You can add up to 256 port whitelist entries. ![NX_WhitelistPortAdd_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-c39b619c-bcae-94fc-70aa-a51c87448f7b.png?sv=2026-02-06&spr=https&st=2026-11-20T02%3A57%3A02Z&se=2026-11-20T03%3A57%3A02Z&sr=c&sp=r&sig=LXwp92u7bOiPTx2TTgIS%2F7SRjsAT4WHi9iuieHMp8sw%3D) > [!WARNING] > Important > > Make sure the port whitelist is enabled after you have added the ports to the whitelist. For details about how to enable a port whitelist, see [Enabling or Disabling a Port Whitelist Using the Web UI on page 1](/network-and-platform/docs/enabling-or-disabling-a-port-whitelist-using-the-web-ui). **To add ports to a whitelist:** 1. In the Web UI, choose **Settings** > **Whitelists**. 2. In the **Port** field, enter the relevant port to whitelist traffic. 3. Click **Add Port**. The following message appears: ![NX_WhitelistPortAddSuccess_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-11193d1d-9371-4b24-a34a-94e3a08de35f.png?sv=2026-02-06&spr=https&st=2026-11-20T02%3A57%3A02Z&se=2026-11-20T03%3A57%3A02Z&sr=c&sp=r&sig=LXwp92u7bOiPTx2TTgIS%2F7SRjsAT4WHi9iuieHMp8sw%3D) 4. Repeat the preceding steps on each additional port to add to a whitelist. 5. Close the message.