--- title: "Adding rules to a network whitelist using the Web UI" slug: "adding-rules-to-a-network-whitelist-using-the-web-ui" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:40Z published: 2026-09-12T20:42:40Z canonical: "docs.trellix.com/adding-rules-to-a-network-whitelist-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Adding rules to a network whitelist using the Web UI You can add an IP address or subnet by configuring a policy configuration rule to a network whitelist by using the fields of the **Settings: Whitelists** page. You enter each rule separately. You can add up to 256 network whitelist rules. ![NX_WhitelistNetworkAdd_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-7a71ca07-bfa4-b12a-fcb3-8c9b40d54084.png?sv=2026-02-06&spr=https&st=2026-11-20T02%3A56%3A56Z&se=2026-11-20T03%3A56%3A56Z&sr=c&sp=r&sig=qKTBQX61lwCcoZybvJH%2FXzyHq%2BQ%2FLtCHSmyxV5HuMPo%3D) You specify the settings for each rule of the network whitelist, as described in the following table. | Field | Description | | --- | --- | | VLAN | (Optional) A virtual local area network (VLAN) identification number to add to the whitelist. The default value is "ALL". The range is from 1 to 4094. | | Address | IP address to add to the whitelist. > [!WARNING] > Important > > To add a URL to the whitelist instead, see Adding or deleting a custom whitelist rule using the CLI. | | Mask | Valid Classless Inter-Domain Routing (CIDR) mask for the host prefix. | | Interface | Interface on which to apply the whitelist. When you apply interface A, traffic entering the appliance on pether3 and pether4 are whitelisted. When you apply interface B, traffic entering the appliance on pether5 and pether6 are whitelisted. The following interfaces are available: - For the Trellix NX 10000 models: ALL or A. - For all other Trellix models: ALL, A, B, B1, or B2. | | Mode | Options for the traffic filter: - Host—Whitelist any traffic in which the source IP address or destination IP address matches the defined IP address or mask. This option is the default. - Source—Whitelist a TCP session in which the source IP address matches the defined IP address or mask. - Destination—Whitelist a TCP session in which the destination IP address matches the defined IP address or mask. Traffic filters whitelist IP addresses within a session. A session starts with the first packet that passes through the appliance or sensor. | | Monitor | The appliance or sensor can monitor the specified address on the whitelist and alert you about malicious traffic. This setting does not block malicious traffic. If this checkbox is not selected, the appliance or sensor does not monitor traffic. The Monitor option is not available if you select the Source or Destination option. | **To add a rule to a network whitelist:** 1. In the Web UI, choose **Settings** > **Whitelists**. 2. (Optional) Enter the VLAN identification number for the VLAN you want to add to the whitelist in the **VLAN** field. 3. Enter an IP address for the whitelist in the **Address** field. 4. Enter the mask length for the host prefix in the **Mask** field. 5. Select an interface on which to apply the whitelist in the **Interface** drop-down list. 6. Select an option to filter traffic in the **Mode** drop-down list. - **Host** - **Source** - **Destination** 7. (Optional) Select the **Monitor** checkbox if you specified **Host** mode. 8. Click **Add Whitelist**. The rule is added to a network whitelist. The following message appears: ![NX_WhitelistPortAddSuccess_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-11193d1d-9371-4b24-a34a-94e3a08de35f.png?sv=2026-02-06&spr=https&st=2026-11-20T02%3A56%3A56Z&se=2026-11-20T03%3A56%3A56Z&sr=c&sp=r&sig=qKTBQX61lwCcoZybvJH%2FXzyHq%2BQ%2FLtCHSmyxV5HuMPo%3D) 9. Repeat the preceding steps to add additional rules to a network whitelist. 10. Close the message.