--- title: "Adding sensors and hybrid appliances to a Central Management appliance" slug: "adding-sensors-and-hybrid-appliances-to-a-central-management-appliance" updated: 2026-08-24T20:40:08Z published: 2026-08-24T20:40:08Z canonical: "docs.trellix.com/adding-sensors-and-hybrid-appliances-to-a-central-management-appliance" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Adding sensors and hybrid appliances to a Central Management appliance You can use the Central Management Web UI or CLI to add sensors and hybrid appliances to an on-premises Central Management appliance for management. **Prerequisites** - Operator or Admin access **Adding sensors and hybrid appliances to the Central Management appliance using the Web UI** Use the **Appliances** > **Sensors** page to add appliances that will function as sensors or hybrid appliances to a Central Management appliance. | **Field** | **Description** | | --- | --- | | Display Name | The name of the appliance. (The name will be displayed in the show cmc appliances command output.) | | IP Address | The IPv4 or IPv6 address of the management interface on the appliance. | | Username | A user account on the appliance with the admin role. | | Password | The password for the user account specified in the **Username** field. | | Appliance Host Key | (*Required if host-key authentication is enabled*) The RSA v2 host key for the appliance. For details, see the *Trellix System Security Guide*. | | Comment | (*Optional*) A comment that describes the appliance. | ##### To add an appliance: 1. Log into the Central Management Web UI. 2. Select **Appliances** > **Sensors**. 3. Click **Actions** > **Add Sensor**. Enter values for the fields described in the preceding table. 4. Click **Add**. Information about each appliance is displayed. To see details about a specific appliance, click the appliance name. **Adding sensors and hybrid appliances to the Central Management appliance using the CLI** Use the commands in this section to add appliances that will function as sensors or hybrid appliances to a Central Management appliance. ##### To add an appliance: 1. Log in to the Central Management CLI. 2. Go to CLI configuration mode: ``` cm-hostname > enable cm-hostname # configure terminal ``` 3. Add the appliance: ``` cm-hostname (config) # cmc appliance address cm-hostname (config) # cmc appliance auth password username cm-hostname (config) # cmc appliance auth password password ``` where: - `appl ID` is the name of the appliance. (The name is displayed in the `show cmc appliances` command output.) - `IP address` is the IPv4 or IPv6 address of the management interface on the appliance. - `username` is the username of a user account on the appliance with the admin role. - `password` is the password of the user specified by username. 4. Repeat the previous step for each additional appliance. 5. Check the connection status: ``` cm-hostname (config) # show cmc appliances ``` 6. Save your changes: ``` cm-hostname (config) # write memory ``` **Example** The following example adds the nx-1 and nx-2 appliances to the Central Management appliance. ``` cm-1 (config) # cmc appliance nx-1 address 172.17.74.50 cm-1 (config) # cmc appliance nx-1 auth password username admin cm-1 (config) # cmc appliance nx-1 auth password password admin123 cm-1 (config) # cmc appliance nx-2 address 10.13.65.14 cm-1 (config) # cmc appliance nx-2 auth password username admin cm-1 (config) # cmc appliance nx-2 auth password password admin123 cm-1 (config) # show cmc appliances Appliance nx-1: Address:             172.17.74.50 Enabled:             yes Connected:           yes (server-initiated) Status check OK:     yes Version compatible:  no Appliance nx-2: Address:             10.13.65.14 Enabled:             yes Connected:           yes (server-initiated) Status check OK:     yes Version compatible:  no ```