--- title: "Adding storage using the Web UI" slug: "adding-storage-using-the-web-ui-1" tags: ["File Protect (FX)", "Product Usage"] updated: 2026-09-08T23:23:18Z published: 2026-09-08T23:23:18Z canonical: "docs.trellix.com/adding-storage-using-the-web-ui-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Adding storage using the Web UI Use the **Add Storage** section of the Configure Storage page to add storage. ### Note The settings in the **Add Storage** section vary depending on the remote file access protocol. You require read, write and delete permissions for storages configured as **Quarantine or Good/Unknown/Whitelist**, to perform scan operations. ![FX_AddShare_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-852fd3ad-a83e-063d-1ad0-5eb966830acd(1).png?sv=2026-02-06&spr=https&st=2026-11-20T04%3A03%3A08Z&se=2026-11-20T05%3A03%3A08Z&sr=c&sp=r&sig=vQOiGpUuqjyJKtygsku56HZDH0wcWr8o5XljDuXqORE%3D) ### Important If you are using Distributed File System (DFS) shares, you must also configure the IP address of the Windows Internet Name Service (WINS) server used to resolve link targets, as described in [Configuring analysis settings](/docs/configuring-analysis-settings). To add storage: 1. Click the **Storage** tab and then click **Add Storage**. 2. In the **Add Storage** section, complete the fields as described in Storage settings. 3. Click **Configure Storage**. 4. Locate the new storage in the **Currently Configured Storage** section. The icon in the **Status** column is yellow while the storage is being added, and turns green after it is added successfully. ![FX_MountStatus_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-f4d80e68-29da-e5eb-dd79-a644a14b87e6(1).png?sv=2026-02-06&spr=https&st=2026-11-20T04%3A03%3A08Z&se=2026-11-20T05%3A03%3A08Z&sr=c&sp=r&sig=vQOiGpUuqjyJKtygsku56HZDH0wcWr8o5XljDuXqORE%3D) If the icon is red, see [Troubleshooting storage errors](/docs/troubleshooting-storage-errors). :