--- title: "Adding system log servers using the CLI" slug: "adding-system-log-servers-using-the-cli-2" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Customer", "Network Security"] updated: 2026-09-07T21:14:23Z published: 2026-09-07T21:14:23Z canonical: "docs.trellix.com/adding-system-log-servers-using-the-cli-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Adding system log servers using the CLI Follow these steps to add and configure system log servers. **To add an system log server:** 1. Enable the CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Specify the name of the rsyslog server (for example, NX7400) to receive the notification: ``` hostname (config) # fenotify rsyslog trap-sink ``` 3. Specify which servers will receive rsyslog notifications (one server per command): ``` hostname (config) # fenotify rsyslog trap-sink enable ``` 4. Specify the IP address or DNS address of the rsyslog server to send event logs to: ``` hostname (config) # fenotify rsyslog trap-sink address ``` 5. Specify the protocol used to send rsyslog notifications (UDP is the default): To select UDP, enter: ``` hostname (config) # fenotify rsyslog trap-sink protocol UDP ``` 6. Save the configuration: ``` hostname (config) # write memory ```