--- title: "Adding the OCSP URL using the configuration menu" slug: "adding-the-ocsp-url-using-the-configuration-menu-2" tags: ["Install and Get Started", "NDR 4.x", "Customer", "Network Security"] updated: 2026-11-17T09:22:39Z published: 2026-11-17T09:22:39Z canonical: "docs.trellix.com/adding-the-ocsp-url-using-the-configuration-menu-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Adding the OCSP URL using the configuration menu Use the menu options in this section to add the verification OCSP URL so that the appliance can validate certificate revocation. PKI must be selected and CAC must be enabled as the authentication method to add the OSCP URL. To add the verification OCSP URL: 1. Log in to the NDR as npadmin using the NDR address or FQDN. For example: `$ ssh npadmin@10.1.0.1` or `$ ssh npadmin@exampleFQDN` 2. Enter privileged mode: `npadmin@ia> enable` 3. Enter the npadmin password. The password can be 5 to 24 characters long. `[sudo] password for npadmin: <password>` 4. Enter configuration mode: `npadmin@ia# configure system` 5. Enter configuration CAC mode. `npadmin@ia(config)# authentication` 6. In the CAC/PIV configuration menu, select `2` to configure the current authentication method 7. Select `2` to add the verification OCSP URL. Press `Enter`. 8. Enter the verification OCSP URL so that certificate revocation can be validated. Press `Enter`. The configuration of the OCSP URL is displayed in the CAC/PIV configuration menu. 9. Select `S` to save your settings and exit the menu.