--- title: "Aeorhive Access Point configuration" slug: "aeorhive-access-point-configuration" tags: ["Reference", "Helix", "Sec Ops and Analytics"] updated: 2026-09-02T19:14:11Z published: 2026-09-02T19:14:11Z canonical: "docs.trellix.com/aeorhive-access-point-configuration" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Aeorhive Access Point configuration This section describes how to send logs from Aerohive Access Point. **Prerequisites** - Aerohive AP230 802.11ac Wireless AP Version 6.4r1 - Aerohive Networks HiveManager Online 6.4r1 **To enable syslog streaming on the Aerohive AP:** 1. Log in to the Aerohive Networks Hive Manager. 2. Select **Configuration** > **Advanced Configuration** > **Management Services** > **Syslog Assignments**. 3. Click **New** and configure syslog streaming: - **Syslog Server**: Enter the IP address of the Trellix Comm Broker Sender. - **Severity**: Select **Info**. 4. Click **Apply**. 5. Click **Save**. 6. Click **Network Policies** and add the syslog configuration to the network policy you are using for your access points.