This command configures the supported SFP vendor for the monitoring ports.
Syntax:
allow intfport id <port> connector (all-vendors|trellix-only)
Parameter | Description |
|---|---|
<port> | Valid port numbers for NS-series are: G0/1 | G0/2 | G1/1 | G1/2 | G1/3 | G1/4 | G1/5 | G1/6 | G1/7 | G1/8 | G1/9 | G1/10 | G1/11 | G1/12 | G2/1 | G2/2 | G2/3 | G2/4 | G2/5 | G2/6 | G2/7 | G2/8 | G2/9 | G2/10 | G2/11 | G2/12 |
Example:
allow intfport id g0/1 connector trellix-only
allow intfport id g0/2 connector all-vendors
Applicable to:
NS-series Sensors