--- title: "Anomaly measure data block" slug: "anomaly-measure-data-block-1" tags: ["Integration", "IPS 10.1.10"] updated: 2026-09-21T08:19:33Z published: 2026-09-21T08:19:33Z canonical: "docs.trellix.com/anomaly-measure-data-block-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Anomaly measure data block The anomaly measure data block contains a set of measures. The first byte in the block represents a count which tells how many measures are in the data block. The measures are followed by the count byte as shown in the following figure. Anomaly measure data block ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-6B95FC24-31CD-4840-AC0B-FF0B1606A709-low.png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A19%3A49Z&se=2026-11-20T07%3A19%3A49Z&sr=c&sp=r&sig=EVdZSJgHQ1z8YzAzyPV5MEDwVSs9o6ffcajTt2FD60o%3D) Each measure contains two sets of floating point (4 bytes) values. The first set represents the bins and the second set represents the bin-count data values. The first byte in the measure contains the measure id, the second byte contains a count that tells how many four byte values are in each set, and rest of the bytes contain floating point values as shown in the following figure. Measure ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-F8EE5A44-EA7C-4DAD-BF65-AE956B3968A1-low.png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A19%3A49Z&se=2026-11-20T07%3A19%3A49Z&sr=c&sp=r&sig=EVdZSJgHQ1z8YzAzyPV5MEDwVSs9o6ffcajTt2FD60o%3D)