--- title: "Applying a breakpoint to a chain" slug: "applying-a-breakpoint-to-a-chain-2" tags: ["Install and Get Started", "NDR 4.x", "Customer", "Network Security"] updated: 2026-11-17T09:22:39Z published: 2026-11-17T09:22:39Z canonical: "docs.trellix.com/applying-a-breakpoint-to-a-chain-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Applying a breakpoint to a chain Adding a breakpoint to a chain allows you to step through each operation and view the output before running the next operation in the chain. The Payload Encode and Decode tool allows you to add multiple break points to a chains. You can also disable an operation in a chain to stop it from running. **To apply a breakpoint to a chain:** 1. Create a new chain by dragging and dropping the operations you want to run in the New Chain window. 2. Click the **Breakpoint** icon next to each operation you want to step through. 3. Click **RUN** to start the chain and apply it to the entire connection stream.The chain will stop running at your first breakpoint. 4. Click **Step Through** to continue running the chain until the next breakpoint.