--- title: "Applying an IPS policy to managed platforms (CLI)" slug: "applying-an-ips-policy-to-managed-platforms-cli" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-12T20:38:44Z published: 2026-09-12T20:38:44Z canonical: "docs.trellix.com/applying-an-ips-policy-to-managed-platforms-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Applying an IPS policy to managed platforms (CLI) From the Central Management System appliance CLI, you can apply an IPS policy to the monitoring interfaces of managed IPS-enabled platforms. ##### Prerequisites - Log in to the Central Management System appliance as Operator or Admin. - Verify that the IPS policy to be applied at multiple platforms is identical across those platforms by comparing the fingerprints. In the following example, the IPS policy **p1** is defined identically on the managed appliances in the group **NXips**. ``` host (config) # cmc execute group NXips command "show ips policies p1 fingerprint" ============ Appliance NX_900_IPS ============ Execution was successful. Execution output: 2014/04/18 12:36:34 | 4862cb13e6777d20c3b720d9d5b471a4 ============ Appliance NX_10000_IPS ============ Execution was successful. Execution output: 2014/04/18 13:01:58 | 4862cb13e6777d20c3b720d9d5b471a4 ``` ##### Procedure To apply an IPS policy on a centrally managed IPS-enabled platform: 1. Enable CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Use the **cmc execute appliance ** command to execute the **ips apply** command on an appliance or appliance group:. - To apply the policy to the management interface of a single managed appliance, use the parameter to specify the appliance name. The following example applies IPS policy **p1** on interface **A** on appliance named **NX4400**. ``` host (config) # cmc execute appliance NX4400 command "ips apply p1 interface A" ============ Appliance NX4400 ============ Execution was successful. Execution output: (none) ``` - To apply the policy to the management interfaces of multiple appliances, use the parameter to specify the appliance group name. The following example applies IPS policy **p1** on interface **A** of the appliances in group **NXips**, which is composed of IPS-enabled appliances **NX_900_IPS** and **NX_10000_IPS**. ``` host (config) # cmc execute group NXips command "ips apply p1 interface A" ============ Appliance NX_900_IPS ============ Execution was successful. Execution output: (none) ============ Appliance NX_10000_IPS ============ Execution was successful. Execution output: (none) ``` 3. Verify your changes by using the **cmc execute** command to run the "show ips policies " command on each affected appliance. 4. Save your configuration changes on each affected appliance. :