--- title: "Applying an IPS policy to managed platforms (Web UI)" slug: "applying-an-ips-policy-to-managed-platforms-web-ui" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-12T20:38:44Z published: 2026-09-12T20:38:44Z canonical: "docs.trellix.com/applying-an-ips-policy-to-managed-platforms-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Applying an IPS policy to managed platforms (Web UI) From the Central Management System appliance Web UI, you can apply an IPS policy to the monitoring interfaces of managed IPS-enabled platforms. ##### Prerequisites - Log in to the Web UI of the Central Management System appliance as Operator or Admin. - Verify that you can access the IPS-enabled platforms you want to manage. - Verify that the IPS policy to be applied at multiple platforms is identical across those platforms by comparing the fingerprints. ### Note For this software release, IPS policy fingerprints can be verified from the CLI only. In the following example, the IPS policy **p1** is defined identically on the two IPS-enabled platforms that are centrally managed in the group **NXips**. ``` host (config) # cmc execute group NXips command "show ips policies p1 fingerprint" ============ Appliance NX_900_IPS ============ Execution was successful. Execution output: 2014/04/18 12:36:34 | 4862cb13e6777d20c3b720d9d5b471a4 ============ Appliance NX_10000_IPS ============ Execution was successful. Execution output: ``` ``` 2014/04/18 13:01:58 | 4862cb13e6777d20c3b720d9d5b471a4 ``` ##### Procedure To apply an IPS policy on a centrally managed IPS-enabled platform: 1. In the Web UI, choose **Settings > Appliance Settings**. 2. Use the Group and Appliance drop-down menus to select the IPS-enabled platforms you want to manage. 3. Select **IPS** in the left navigation bar. 4. To apply an IPS policy to monitoring interfaces on multiple managed IPS-enabled platforms, click **Apply Policy** in the Actions column for that policy. 5. Select the monitoring interfaces to which you want the IPS policy applied. 6. Click **Apply Policy**. 7. Click **Done**. :