--- title: "Assign a Connection Limiting policy to an interface or subinterface" slug: "assign-a-connection-limiting-policy-to-an-interface-or-subinterface-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:57Z published: 2026-11-19T12:27:57Z canonical: "docs.trellix.com/assign-a-connection-limiting-policy-to-an-interface-or-subinterface-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Assign a Connection Limiting policy to an interface or subinterface After you define a Connection Limiting policy at the admin domain, you can assign it to an interface or subinterface. **Steps:** 1. Click the **Policy** tab. 2. Select the domain from the **Domain** drop-down list. 3. Select **Intrusion Prevention** → **Policy Manager**. 4. Double-click on the interface to which you want to assign a connection limiting policy. The **** panel opens on the right side. ![GUID-4DF98414-181F-420C-B7D0-D9808D8D2197-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-76e0324e-d4e5-5a1e-f9e5-b451d847af25(7).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A48Z&se=2026-11-20T11%3A34%3A48Z&sr=c&sp=r&sig=eqHxKevOVWaQgpLpT8AvOAfIaZSKJR%2BA6%2FSsW%2FdwYVo%3D) 5. Under the **Connection Limiting** section, select the policy from the **Policy** drop down list. 6. Click **Save**. 7. Deploy the configuration changes to the Sensor.