--- title: "Assign a license to a Sensor" slug: "assign-a-license-to-a-sensor-1" tags: ["Hardware"] updated: 2026-09-17T10:17:59Z published: 2026-09-17T10:17:59Z canonical: "docs.trellix.com/assign-a-license-to-a-sensor-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Assign a license to a Sensor To assign a license to the NS9600 Sensors (standalone or in fail-over setup), perform the following steps: 1. Go to **Manager** → **** → **Setup** → **Licenses**. 2. Click the **System** tab. 3. Click **Assign**. The **Assign License** pop-up window opens. 4. Click the **Assign To** drop down and select the Sensor. 5. Click **Assign** to assign the license to the Sensor. Make sure to reboot the Sensor when the capacity of the license is changed. > [!WARNING] > Important > > - Licenses can only be assigned to NS9600 stack or stacked Sensors in fail-over setup from the **Manager** → **** → **Global** → **Device Manager** page. For more information, see [Add a stack to the Manager](/network-and-platform/docs/add-a-stack-to-the-manager). > - Suricata Sensor is listed only for the 60Gbps NS9600 licenses.