--- title: "Assign a license to a Sensor" slug: "assign-a-license-to-a-sensor-2" tags: ["Install and Get Started", "IPS 11.1.x"] updated: 2026-11-19T12:53:55Z published: 2026-11-19T12:53:55Z canonical: "docs.trellix.com/assign-a-license-to-a-sensor-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Assign a license to a Sensor To assign the license, perform the following steps: **Steps:** 1. Navigate to **Manager** → **** → **Setup** → **Licenses**. > [!WARNING] > Important > > Licenses can only be assigned to NS9600 stack or stacked Sensors in fail-over setup from the **Manager** → **** → **Global** → **Device Manager** page. For more information, see [Add a stack to the Manager](/network-and-platform/docs/add-a-stack-to-the-manager-2). 2. Click the **System** tab. 3. Choose the license that suits your requirement and click **Assign**. ![system_license_1.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-cb3cd053-1c3c-fe71-8b56-a4a4bb68edf5.png?sv=2026-02-06&spr=https&st=2026-11-20T07%3A28%3A10Z&se=2026-11-20T08%3A28%3A10Z&sr=c&sp=r&sig=SEdjnxy88t5c0vG3n7YOvnjdQz1dM8OI9RaULyc5QXQ%3D) 4. The **Assign License** pop-up window opens, click the **Assign To** drop-down menu and select the Sensor. 5. Click **Assign** to assign the license to the Sensor. ![GUID-A157C2F4-E07A-4849-9498-144C4A05EB4F-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-9a943e64-eff6-b38b-7373-6b8fec11e3bb.png?sv=2026-02-06&spr=https&st=2026-11-20T07%3A28%3A10Z&se=2026-11-20T08%3A28%3A10Z&sr=c&sp=r&sig=SEdjnxy88t5c0vG3n7YOvnjdQz1dM8OI9RaULyc5QXQ%3D) > [!NOTE] > Note > > In case you are replacing an existing license, a **Confirmation** dialog-box opens. To confirm license replacement, click **OK**, else, click **Cancel**. 6. Upon successful license assignment, an **Informational** dialog-box opens stating the license has been successfully assigned. Click **OK** to close it. ![GUID-0221D1E8-B6C9-4572-B637-BCC254243C75-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-cf6d7b7f-0cfa-0d7a-d359-c3de5f4e3c86.png?sv=2026-02-06&spr=https&st=2026-11-20T07%3A28%3A10Z&se=2026-11-20T08%3A28%3A10Z&sr=c&sp=r&sig=SEdjnxy88t5c0vG3n7YOvnjdQz1dM8OI9RaULyc5QXQ%3D) > [!NOTE] > Note > > In case you are replacing an existing license with a license of varied capacity, you must reboot the device for the new capacity to take effect. If you are replacing an existing license with a same capacity license, reboot is not required.