--- title: "Assign a license to a Sensor" slug: "assign-a-license-to-a-sensor-7" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T09:43:52Z published: 2026-09-17T09:43:52Z canonical: "docs.trellix.com/assign-a-license-to-a-sensor-7" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Assign a license to a Sensor To assign the license to the Sensor, perform the following steps: 1. Navigate to **Manager** → **** → **Setup** → **Licenses**. 2. Click the **System** tab. 3. Choose the license that suits your requirement and click **Assign**. ![GUID-9A7D4F57-C6EB-4EFA-BAA3-BD5E0B48F30C-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-118a858a-cb33-ec13-b1d2-a3a261ca25f8.png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A16%3A41Z&se=2026-11-20T12%3A16%3A41Z&sr=c&sp=r&sig=p60wDtJBQwcRaJ05QaqDZ9y%2FQ%2FerNdfN0O8yZNZVSrY%3D) 4. The **Assign License** pop-up window opens, click the **Assign To** drop-down menu and select the Sensor. 5. Click **Assign** to assign the license to the Sensor. ![GUID-41FF8394-7790-49B9-9CA4-D172348ED217-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-f77564b2-7e0a-25e4-6a53-dc6cdb32e86b.png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A16%3A41Z&se=2026-11-20T12%3A16%3A41Z&sr=c&sp=r&sig=p60wDtJBQwcRaJ05QaqDZ9y%2FQ%2FerNdfN0O8yZNZVSrY%3D) > [!NOTE] > Note > > In case you are replacing an existing license, a **Confirmation** dialog-box opens. To confirm license replacement, click **OK**, else, click **Cancel**. 6. Upon successful license assignment, an **Informational** dialog-box opens stating the license has been successfully assigned. Click **OK** to close it. ![GUID-0221D1E8-B6C9-4572-B637-BCC254243C75-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-cf6d7b7f-0cfa-0d7a-d359-c3de5f4e3c86(1).png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A16%3A41Z&se=2026-11-20T12%3A16%3A41Z&sr=c&sp=r&sig=p60wDtJBQwcRaJ05QaqDZ9y%2FQ%2FerNdfN0O8yZNZVSrY%3D) > [!NOTE] > Note > > In case you are replacing an existing license with a license of varied capacity, you must reboot the device for the new capacity to take effect. If you are replacing an existing license with a same capacity license, reboot is not required.