--- title: "Assign QoS policies – alternatives" slug: "assign-qos-policies-alternatives" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:51Z published: 2026-10-05T15:40:51Z canonical: "docs.trellix.com/assign-qos-policies-alternatives" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Assign QoS policies – alternatives There are many options to assign a QoS policy to Sensor ports. You can assign a QoS policy to multiple Sensor ports. You can also go to the **Policy Manager** page of a specific Sensor port pair and select a QoS policy for that port. These options are described here. ## Task 1. Click the **Policy** tab. 2. Select the domain from the **Domain** drop-down list. 3. Go to **Intrusion Prevention** → **Policy Manager**. 4. In the **Interfaces** tab, double-click the Sensor port to which you would like to assign a QoS policy. The **** panel opens. 5. In the **Quality of Service** section, select the inbound and/or outbound policy from the **Inbound Policy** and/or **Outbound Policy** drop down. 6. Under the **Inbound Rate Limiting Profile**, select the **Inbound Profile** for the port. 7. Under the **Outbound Rate Limiting Profile**, select the **Outbound Profile** for the port. 8. Click **Effective Inbound Rules** or **Effective Outbound Rules** to see the order of the rate limiting rules applicable to the ports. This list also shows corresponding bandwidth for each rule. 9. Click **Save**. 10. Deploy the configuration changes to the corresponding Sensor.