--- title: "Assigning a \"dummy\" static IP address" slug: "assigning-a-dummy-static-ip-address" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-10-02T13:50:58Z published: 2026-10-02T13:50:58Z canonical: "docs.trellix.com/assigning-a-dummy-static-ip-address" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Assigning a "dummy" static IP address This topic describes how to assign a "dummy" static IP address to the ether1 interface for the HA cluster. ### Caution If your virtual machines are in different Azure regions, perform this procedure *after* you configure virtual network peering as described in [Configuring virtual network peering](/network-and-platform/docs/configuring-virtual-network-peering). To assign a "dummy" static IP address: 1. In the Azure portal, locate the private IP address Azure assigned to the virtual machine. This is displayed in the **Properties** > **Networking** section for the virtual machine. 2. In the Central Management System CLI, display the ether1 IP address and netmask: ```plaintext hostname (config) # show interface ether1                   ``` 3. Assign the static "dummy" IP address: ```plaintext hostname (config) # interface ether1 ip address ``` where` IP address `and` netmask `are the values returned by the previous step. 4. Repeat these steps on the other node. 5. Go to [Performing the Central Management System HA initial configuration on Microsoft Azure](/network-and-platform/docs/performing-the-central-management-initial-configuration-on-microsoft-azure). :