--- title: "Attaching network interfaces to the virtual machine" slug: "attaching-network-interfaces-to-the-virtual-machine" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-09-09T22:45:38Z published: 2026-09-09T22:45:38Z canonical: "docs.trellix.com/attaching-network-interfaces-to-the-virtual-machine" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Attaching network interfaces to the virtual machine You must attach network interfaces you create in Azure to the Network Security virtual machine. ### Important Attach the interfaces in numeric order. For example, attach ether2, pether3, and then pether4. To attach an interface: 1. Select **All services** > **Virtual Machines**. 2. Select the virtual machine. 3. If the virtual machine is running, click **Stop**. 4. Select **Networking** under **Settings**. 5. Click **Attach network interface**. 6. Select the first network interface and click **OK**. ![Azure_attach_iface.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-01ca744c-1a01-202e-d6ec-84ea0f2140e9.png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A16%3A17Z&se=2026-11-20T11%3A16%3A17Z&sr=c&sp=r&sig=CqriHVXZcGE3fDneabkXiiX%2B58uE1YUtpdBDG4%2BocEc%3D) 7. Repeat the previous step for each network interface. 8. Select the virtual machine and click **Run**. ### Note Network interfaces are placed in the following VRF namespaces: - ether1, ether2—vrf0 - pether3, pether4—vrfA - pether5, pether6—vrfB - pether7, pether8—vrfC - pether9, pether10—vrfD For details about virtual routing and forwarding (VRF), see the "Layer 3 Forwarding Using VRF Instances" information in the *Network Security System Administration Guide*. :