--- title: "Auth0" slug: "auth0" tags: ["Hardware", "Install and Get Started", "Integration", "Product Usage", "Release Notes", "Hyperautomation"] updated: 2026-09-02T17:42:15Z published: 2026-09-02T17:42:15Z canonical: "docs.trellix.com/auth0" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Auth0 You can configure an application connector using the OAuth Client Credentials grant type for secure, machine-to-machine authentication. Perform the following steps to configure an application: > [!TIP] > Tip > > To add another configuration instance for the same application (e.g., connecting to a staging environment), click Add again and repeat the steps above. 1. In the application configuration form, provide a descriptive name in the **Name** field. 2. Navigate to the HTTP tab to set the authentication parameters. 3. Set the authentication parameters as follows: - **URL**: Define the authentication endpoint (e.g., https://dev-2f8xcaa5.us.auth0.com). - **Auth Type**: Select OAuth. - **Grant Type**: Select Client Credentials for machine-to-machine authentication. - **Client ID**: Provide the unique client ID for the application. - **Client Secret**: Enter the client secret required for authentication. 4. Click **Next**. 5. In the **Edge** tab, select the Edge component that is responsible for executing requests against this application (example, trellix-default). 6. Use the **Auto Detect** button to find and list available Edge components. 7. Click **Save**.