--- title: "AWS S3" slug: "aws-s3" tags: ["Hardware", "Install and Get Started", "Integration", "Product Usage", "Release Notes", "Hyperautomation"] updated: 2026-09-02T17:42:15Z published: 2026-09-02T17:42:15Z canonical: "docs.trellix.com/aws-s3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # AWS S3 You can configure an application connector using the AWS S3 authentication type. Perform the following steps: 1. In the application configuration form, provide a descriptive name in the **Name** field. 2. Navigate to the HTTP tab to set the authentication parameters. 3. Set the authentication parameters as follows: - **URL**: Define the S3 endpoint (e.g., https://s3.us-west-2.amazonaws.com). - **Auth Type**: Select AWS Signature. - **Access Key**: Provide the AWS access key ID. - **Secret Key**: Enter the AWS secret key. - **Region**: Specify the AWS region where the target S3 bucket is located. 4. Click **Next**. 5. In the **Edge** tab, select the Edge component that will be responsible for executing requests against this application (example, trellix-default). 6. Use the **Auto Detect** button to find and list available Edge components. 7. Click **Save**. > [!TIP] > Tip > > To add another configuration instance for the same application (e.g., connecting to a different S3 region or account), click Add again and