--- title: "Backing up the database" slug: "backing-up-the-database-3" updated: 2026-09-30T17:48:05Z published: 2026-09-30T17:48:16Z canonical: "docs.trellix.com/backing-up-the-database-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Backing up the database You can save the backup file three ways: - To a local destination on the appliance - To a remote server (this first creates a local backup and then transfers it to the remote server) - To a USB device connected to your local machine ### Note Use the `media usb mount` command to mount the USB device to the attached appliance. If the USB device is mounted, use the `media usb eject` command to unmount the USB device. For details about how to mount or unmount a USB device, see [Mounting or unmounting a USB device using the CLI](/network-and-platform/docs/mounting-or-unmounting-a-usb-device-using-the-cli-2) . The appliance must have sufficient space to save one backup. You cannot proceed with a backup operation if there is not enough space on the requested backup destination. For information about estimating the amount of space, see [Estimating the space needed for the backup file](/network-and-platform/docs/estimating-the-space-needed-for-the-backup-file-3) . ### Caution Stop all running scans before you back up the database. ### Note The appliance is fully functional while the backup operation is in process. Prerequisites - Admin access