--- title: "Basics of Using Trellix Intrusion Prevention System" slug: "basics-of-using-trellix-intrusion-prevention-system" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:39:58Z published: 2026-10-05T15:39:58Z canonical: "docs.trellix.com/basics-of-using-trellix-intrusion-prevention-system" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Basics of Using Trellix Intrusion Prevention System This section provides a high-level overview of how to use Trellix IPS. The process of setting up and running Trellix IPS falls into some basic stages as given below: ## Task 1. Deciding where to deploy Sensors and in what operating mode 2. Setting up your Sensors 3. Establishing Sensor-to-Manager communication 4. Configuring your deployment using the Manager 5. Updating your signatures and software 6. Viewing and working with data generated by Trellix IPS 7. Tuning your deployment Each of these stages consists of a number of tasks; some are simple, some are complex. You will generally perform steps 1 through 3 only once per Sensor.