--- title: "Before you begin" slug: "before-you-begin-9" tags: ["Reference", "IPS 11.1.x"] updated: 2026-10-01T07:58:57Z published: 2026-10-01T07:58:57Z canonical: "docs.trellix.com/before-you-begin-9" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Before you begin ### Indications - The Manager displays a system event message indicating which fan (FRU) is bad. - The Amber LED should be illuminated for a fan module that's malfunctioning. ### Safety considerations Read the following safety considerations carefully before you begin the removal and reinstallation of any fan module in NS-series Sensors. - It is recommended that you always use an antistatic mat and antistatic strap while working on components inside the system. - To ensure proper operation and cooling, all bays in the system and system fans must be populated always with either a component or with a blank. > [!WARNING] > Caution > > Opening or removing the system cover while the system is powered on may expose you to a risk of electric shock. You will need the following tools: - Key to the system keylock - Phillips* (cross head) screwdriver (#2 bit) - Needle nosed pliers - Anti-static wrist strap and conductive foam pad (recommended)