--- title: "Blue Coat Systems ProxySG configuration" slug: "blue-coat-systems-proxysg-configuration-1" tags: ["Reference", "Helix Enterprise", "Sec Ops and Analytics"] updated: 2026-09-05T14:07:16Z published: 2026-09-05T14:07:16Z canonical: "docs.trellix.com/blue-coat-systems-proxysg-configuration-1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Blue Coat Systems ProxySG configuration This section describes how to send logs from Blue Coat Systems ProxySG using TCP syslog. > [!NOTE] > Note > > This procedure works only if the syslog server (Trellix Comm Broker) supports receiving events using TCP (not UDP). To send logs from Blue Coat Systems ProxySG: 1. On the **Configuration** > **Logs** tab, define an Access Log file that meets your requirements. 2. On the **Configuration** > **Upload Client** tab, select **Custom Client** in the **Client type** field. 3. Select **text file** in the **Save the log file as** field. 4. (*Optional*) To reduce the transmission time for log uploads, enter a value as low as 5 seconds in the **Send partial buffer after** field. 5. In the **Upload Client** section, click **Settings** to open the **Custom Client settings** dialog box for the Access Log file. 6. Specify the IP address and TCP port number to point the custom client to the syslog server (the Comm Broker Sender). 7. On the **Configuration** > **Upload Schedule** tab, select **continuously** in the **Upload type** section. 8. Open Visual Policy Manager. 1. For a Web Access Layer, set a new action to **Modify Access Logging**. 2. In the Add Access Logging Object dialog box, select **Enable logging to** and then select the Access Log file.