--- title: "boot next fallback-reboot enable" slug: "boot-next-fallback-reboot-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:36Z published: 2026-08-04T17:22:36Z canonical: "docs.trellix.com/boot-next-fallback-reboot-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # boot next fallback-reboot enable Use this command to enable or disable the fallback reboot during upgrade or downgrade activities. By default, if the appliance fails to apply the configuration during a software upgrade or downgrade action, the appliance will reboot using the backup partition. You can use the `no` variant of this command to disable this action. > [!NOTE] > Note > > The fallback reboot is always triggered if you are downgrading to an older software version that has never been run on the appliance before. You can suppress this behavior by using the `no boot next fallback-reboot enable` command. ### Syntax `[no] boot next fallback-reboot enable` ### Parameters `no` Disables the reboot fallback behavior on the appliance. ### Example The following example enables the fallback behavior. (default behavior) `hostname (config) # boot next fallback-reboot enable` The following example disables the fallback behavior. `hostname (config) # no boot next fallback-reboot enable` ### User role Admin ### Command mode Config ### Supported Appliances - **Malware Analysis:** Before Release 6.4 - **Central Management System:** Before Release 6.4 - **Email Security — Server:** Before Release 6.4 - **File Protect:** Before Release 6.4 - **Endpoint Security (HX):** Release 2.5 - **Network Security:** Before Release 6.4