--- title: "bottracker fi-md5 enable" slug: "bottracker-fi-md5-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:41Z published: 2026-08-04T17:22:41Z canonical: "docs.trellix.com/bottracker-fi-md5-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # bottracker fi-md5 enable Enables the file inspection feature that allows the Network Security appliance to calculate MD5 hashes that are detected in network traffic. The Network Security appliance can block or allow traffic that matches a blacklist. This command is not supported onthe SmartVision Edition appliances, which are Network Security appliances with SmartVision edition appliance licenses. The SmartVision Edition sensor is also called *Trellix Network Security, SmartVision Edition*. This command is not supported on Trellix NX 10000 models By default, one file hash feed must be available so that the Network Security appliance can calculate MD5 hashes. If you do not want to impact appliance performance, you can stop calculating the MD5 hashes on the Network Security appliance. ### Syntax `[no] bottracker fi-md5 enable` ### Parameters `[no]` Use the no form of this command to disable calculating MD5 hashes. ### Example The following example enables the file inspection feature to allow the Network Security appliance to calculate MD5 hashes. ``` hostname (config) # bottracker fi-md5 enable ``` The following example disables the file inspection feature to stop calculating MD5 hashes. ``` hostname (config) # no bottracker fi-md5 enable ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances - **Network Security:** Before release 8.0.0