--- title: "bottracker fi-sha256 enable" slug: "bottracker-fi-sha256-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:41Z published: 2026-08-04T17:22:41Z canonical: "docs.trellix.com/bottracker-fi-sha256-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # bottracker fi-sha256 enable Enables the file inspection feature that allows the Network Security appliance to calculate SHA-256 hashes that are detected in network traffic. The Network Security appliance can block or allow traffic that matches a blacklist. This command is not supported onthe SmartVision Edition appliances, which are Network Security appliances with SmartVision edition appliance licenses. The SmartVision Edition sensor is also called *Trellix Network Security, SmartVision Edition*. This command is not supported on FireEye NX 10000 models. By default, one file hash feed must be available so that the Network Security appliance can calculate SHA-256 hashes. If you do not want to impact appliance performance, you can stop calculating the SHA-256 hashes on the Network Security appliance. ### Syntax `[no] bottracker fi-sha256 enable` ### Parameters `[no]` Use the no form of this command to disable calculating SHA-256 hashes. ### Example The following example enables the file inspection feature to allow the Network Security appliance to calculate SHA-256 hashes. ``` hostname (config) # bottracker fi-sha-256 enable ``` The following example disables the file inspection feature to stop calculating SHA-256 hashes. ``` hostname (config) # no bottracker fi-sha-256 enable ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances - **Network Security:** Before release 8.0.0