--- title: "bottracker file-inspect enable" slug: "bottracker-file-inspect-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:41Z published: 2026-08-04T17:22:41Z canonical: "docs.trellix.com/bottracker-file-inspect-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # bottracker file-inspect enable Enables the file inspection feature, which allows the Network Security appliance to inspect files that are detected in network traffic. When file inspection is enabled, files are compared to a denylist. If a file matches the denylist, it is marked as malicious. The malicious traffic is blocked and an alert is created. File inspection can match on IP addresses, URIs, domains, and streaming sessions as well as other files. Inspection of hash files can be enabled separately. > [!WARNING] > Important > > The file inspection feature is not supported on Trellix NX 10000 models. > [!WARNING] > Caution > > Enabling file inspection may impact performance, especially latency, on the Network Security appliances working in inline mode. The impact can vary depending on the capacity of the appliance and the volume of file traffic processed by the appliance. Under certain conditions, if an appliance receives at least 25 percent file traffic volume and operates at 50 percent of peak throughput, the latency can increase up to 1.5 to 2 times normal. ### Syntax `[no] bottracker file-inspect enable` ### Parameters `[no]` Use the no form of this command to disable file inspection. ### Example The following example enables the file inspection feature on the Network Security appliance. ``` hostname (config) # bottracker file-inspect enable ``` The following example disables the file inspection feature. ``` hostname (config) # no bottracker file-inspect enable ``` ### User role Admin or Operator ### Command mode Config ### Supported appliances - **Network Security:** Release 8.3.5