--- title: "bottracker trace-save enable" slug: "bottracker-trace-save-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:41Z published: 2026-08-04T17:22:41Z canonical: "docs.trellix.com/bottracker-trace-save-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # bottracker trace-save enable Enables the bot tracker to save packets in a flow that matches Snort rules. Pcaps are saved in /data/bott/cs-traces. This command is not supported onthe SmartVision Edition appliances, which are Network Security appliances with SmartVision edition appliance licenses. The SmartVision Edition sensor is also called *Trellix Network Security, SmartVision Edition*. The bot tracker feature is enabled by default. It tracks callbacks and the entire infection life cycle. The bot tracker is available only when the SECURITY_CONTENT license is installed. This command is specific to the File Protect and Network Security appliances. ### Syntax `[no] bottracker trace-save enable` ### Parameters None ### Example The following example enables the bot tracker to save packets in a flow that matches Snort rules. ``` hostname (config) # bottracker trace-save enable ``` ### User role Admin ### Command mode Config ### Supported Appliances - **Central Management System:** Before release 6.4 - **File Protect:** Before release 6.4 - **Network Security:** Before release 6.4