--- title: "Bradford Network Sentry configuration" slug: "bradford-network-sentry-configuration" tags: ["Reference", "Helix", "Sec Ops and Analytics"] updated: 2026-09-02T19:14:18Z published: 2026-09-02T19:14:18Z canonical: "docs.trellix.com/bradford-network-sentry-configuration" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Bradford Network Sentry configuration Follow these steps on the Network Sentry so that the appliance can push syslog events to Trellix Helix: 1. Navigate to **System>Settings>Log Receivers**. 2. Add a Log Receiver and select or set the following information: 1. Type: CEF 2. IP Address of the Comm Broker 3. Navigate to **Logs>Event Management.** 4. For each event type that is to be logged with Trellix Helix, set the Event Log to either: - “Log External - Log Internal & External > [!NOTE] > Note > > Some events are generated frequently and may not be necessary for day-to-day operations. Review the list of events to determine which ones will provide the most useful feedback, and then enable them. You may also choose to enable an event for a short period of time only, such as to find a particular host when it connects to the network.