--- title: "bridge <interface> ageing-time <time>" slug: "bridge-interface-ageing-time-time" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:41Z published: 2026-08-04T17:22:41Z canonical: "docs.trellix.com/bridge-interface-ageing-time-time" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # bridge <interface> ageing-time <time> Sets the amount of time (in seconds) that a MAC addresses remain in the forwarding table. Once the specified time is exceeded, the MAC address is removed from the forwarding table. The time starts at the moment the MAC address is last seen. ### Syntax `[no] bridge <interface> ageing-time <time>` ### Parameters ``` no ``` Removes the previously set forward time. `time` Time in seconds. ### Example The following example sets the aging time on ether1 to 30 seconds. `hostname (config) # bridge ether1 ageing-time 30` The following example removes the previously set aging time. `hostname (config) # no bridge ether2 ageing-time` ### User role Admin and operator ### Command mode Config ### Supported appliances - **Malware Analysis:** Before Release 6.4 - **Email Security — Server:** Before Release 6.4 - **File Protect:** Before Release 6.4 - **Network Security:** Before Release 6.4 - **Intelligent Virtual Execution - Server:** Release 7.9