--- title: "bridge <interface> enable" slug: "bridge-interface-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:41Z published: 2026-08-04T17:22:41Z canonical: "docs.trellix.com/bridge-interface-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # bridge <interface> enable Enables the bridge interface. > [!NOTE] > Note > > By default, when you create a bridge interface using the bridge command, the bridging is enabled. ### Syntax `[no] bridge <interface>` ### Parameters ``` no ``` Disables the bridge interface. `interface` The interface to be used as a bridge. ### Example The following example enables bridging on ether1. `hostname (config) # bridge ether1 enable` The following example disables bridging on ether2. `hostname (config) # no bridge ether2 enable` ### User role Admin and operator ### Command mode Config ### Supported appliances - **Malware Analysis:** Before Release 6.4 - **Email Security — Server:** Before Release 6.4 - **File Protect:** Before Release 6.4 - **Network Security:** Before Release 6.4 - **Intelligent Virtual Execution - Server:** Release 7.9