--- title: "bridge <interface> priority <priority>" slug: "bridge-interface-priority-priority" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:41Z published: 2026-08-04T17:22:41Z canonical: "docs.trellix.com/bridge-interface-priority-priority" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # bridge <interface> priority <priority> Sets the bridge priority. This priority is used to determine signal path. A lower number represents a higher priority. ### Syntax `[no] bridge <interface> priority <priority>` ### Parameters `no` Sets the bridge priority at the default value. ``` priority ``` The priority value.Range: -1 to 65535 ### Example The following example sets ether1's bridge priority to 60. `hostname (config) # bridge ether1 priority 60` The following example resets ether2's bridge priority to the default value. `hostname (config) # no bridge ether2 priority` ### User role Admin and operator ### Command mode Config ### Supported appliances - **Malware Analysis:** Before Release 6.4 - **Email Security — Server:** Before Release 6.4 - **File Protect:** Before Release 6.4 - **Network Security:** Before Release 6.4 - **Intelligent Virtual Execution - Server:** Release 7.9